Philips 8000 Series - Setup

35EN
Record an announcement
The maximum length of the announcement you
can record is 3 minutes. The newly recorded
announcement automatically replaces the old
one.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Announcement], then press [OK]
to conrm.
4 Select [Answer & rec.] or [Answer only],
then press [OK] to conrm.
5 Select [Record new], then press [OK] to
conrm.
6 Recording starts after the beep.
7 Press [OK] to stop recording or the
recording stops after 3 minutes.
» You can listen to the newly recorded
announcement on the handset.
Note
• Make sure that you speak close to the microphone
when you record an announcement.
Listen to the announcement
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Announcement], then press [OK]
to conrm.
4 Select [Answer & rec.] or [Answer only],
then press [OK] to conrm.
5 Select [Play], then press [OK] to conrm.
» You can listen to the current
announcement.
Note
• You can no longer listen to the announcement when
you pick up an incoming call.
Restore the default announcement
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Announcement], then press [OK]
to conrm.
4 Select [Answer & rec.] or [Answer only],
then press [OK] to conrm.
5 Select [Use default], then press [OK] to
conrm.
» The handset displays a conrmation
request.
6 Press [OK] to conrm.
» The default announcement is restored.
Incoming messages
Each message can be up to 3 minutes long.
When you receive new messages, the LED at
the back of the handset ashes.
Note
• If you pick up the phone when the caller leaves a
message, the recording stops and you can talk to the
caller directly.
Note
• If the memory is full, the answering machine switches
to [Answer only] automatically. Delete old messages to
receive new ones.