Philips AC3737/10 - Cleaning the Humidification Filter

13EN
2 Pull the back cover.
3 Remove the lter from the appliance.
4 Clean the surface of the lter with a vacuum cleaner.
5 Put the lter back into the appliance.
6 Reattach the back cover.
7 Put the plug of the appliance in the power socket.
8 Tap the button to switch on the appliance.
9 Tap and hold the button for 3 seconds to reset the lter
cleaning time.
10 Wash your hands thoroughly after cleaning the lter.
Cleaningthehumidicationlter
2
3
S
1
1
2
3
1h
1
2
3
1 Switch o the appliance and unplug from the power socket.
2 Open the top cover (
1
)，and then open the lid of the humidication lter (
2
). Take the lter
out from the appliance (
3
).
3 Soak the humidication lter with mild or acid cleanser (24g citric acid with 4L water or 100ml
white vinegar with 4L water) for 1 hour.
4 Rinse the lter thoroughly with a slow and steady stream of water under the tap. Do not rub the
lter.
5 Put the humidication lter back into the appliance.
6 Install the top cover of humidication lter, and then install the top cover of the water tank.
Note:
•
Avoid squeezing or rubbing the humidication lter as this may damage it, leading to a reduction in
its humication eectiveness.
•
To ensure the optimal performance of the lter, avoid drying it directly in sunlight.
3s
9
4
5
6
2
1