Philips AC3737/10 - Replacing the Purification Filter

14 EN
Replacingthepuricationlter
Understandingthehealthyprotectionlock
This appliance is equipped with a lter replacement indicator to make sure that the air purication
lter is in optimal condition when the appliance is operating. When the lter needs to be replaced, the
lter replacement alert lights up red.
If the lter is not replaced in time, the appliance will stop operating and automatically lock to protect
the air quality in the room. Replace the lter as soon as possible.
Replacingthepuricationlter
Note:
•
The lter is not washable or reusable.
•
Always turn o the appliance and unplug from the electrical outlet before replacing the lters.
Filteralertlightstatus Action
The lter replacement alert
lights up
Replace the lter (FY3437)
1 Switch o the appliance and unplug from the power socket.
2
3
4
5
6
2 Pull the back cover.
3 Remove the lter from the appliance. Discard the used lter.
4 Remove all packaging materials of the new lter.
5 Put the new lter into the appliance.
6 Reattach the back cover.
7 Put the plug of the appliance in the power socket.
8 Tap the button to switch on the appliance.
9 Tap and hold the button for 3 seconds to reset the lter lifetime
counter.
10 Wash your hands thoroughly after replacing the lter.
Note: Do not smell the lter as it has collected pollutants from the air.
3s
9