Philips AC4550 - 3 Getting Started; Installing Filters

28 EN
3 Getting started
Installing lters
Remove all packaging of the lters
before using the appliance. Unpack
them and place them into the
appliance described as follows:
Note
• Make sure that you place the air
purication lter in the appliance
rst and then the pre-lter.
• Make sure that the side with
the tag is pointing towards you
when installing the lter.
1 Remove all packaging materials
of the air purication lter.
2 Pull the top part of the front
cover to remove it from the
appliance.
3 Press the two clips down and
pull the pre-lter towards you.
4 Put the unpacked air
purication lter into the
appliance.
5 Put the pre-lter back into the
appliance.
Note
• Make sure that all hooks of the
pre-lte is properly attached to
the purier.