38 EN
Replacing the lter
Note
• The air purication lter is not
washable or reusable.
• Always turn o the air purier
and unplug from the electrical
outlet before replacing the
lters.
• Do not clean the lters with a
vacuum.
• If the pre-lter is damaged,
worn or broken, do not use.
Visit www.philips.com/support
or contact the Consumer Care
Center in your country.
Filter alert light
status
Action
A3 displays
on the screen
and the lter
replacement
alert goes on.
Replace the
NanoProtect
lter Pro S3
(FY4152)
6 Replacing the
air purification
filter
Understanding the
healthy air protect lock
This air purier is equipped with a
lter replacement indicator to make
sure that the air purication lter is
in optimal condition when the air
purier is operating. When the lters
need to be replaced, the lter code
displays on the screen and the lter
replacement alert ( ) lights up red.
If the lters are not replaced in time,
the air purier will stop operating
and automatically lock to protect
the air quality in the room. Replace
the lters as soon as possible
according to the lter code.