30 EN
6 After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If you want
to add more portable device to
connect with this air purier, tap
"i" on the top right of the App.
7 On the device which you want
to connect to this appliance,
download and install the
'Ali Smart Living' app, scan the QR
code generated by "QR code
share" to add a new portable
device.
8 If the connection fails, tap "Enter
hotspot mode" to retry again.
9 Follow the onscreen instruction
and tap "Next" to start the
hotspot Wi-Fi conguration.
4 Using the
appliance
Understanding the air
quality light
Air quality light
color
Air quality level
Blue
Good
Blue-purple
Fair
Purple-red
Poor
Red
Very poor
The air quality light automatically
goes on when the air purier is
switched on, and lights up all colors
in sequence. After approximately
30 seconds, the air quality sensors
select the color that corresponds
to the surrounding air quality of
airborne particles.
The color of the air quality light is
determined by the highest level
among PM2.5, Gas and IAI readings.
PM2.5
AeraSense sensing technology
accurately detects and quickly
responds to even the slightest
particle change in the air. It provides
you with reassurance with real-time
PM2.5 feedback.
Most of the indoor air pollutants
fall under PM2.5 – which refers to
airborne particle pollutants smaller
than 2.5 micrometers. Common
indoor sources of ne particles are
tobacco smoke, cooking, burning
candles. Some airborne bacteria
and the smallest mold spores, pet
allergen and dust mite allergen
particles also fall under PM2.5.
PM2.5 level Air quality light
color
≤35 Blue
36-75 Blue-purple
76-115 Purple-red
>115 Red
GAS
With an advanced gas sensor, a
display ranging from L1 to L4 shows
the level change of potential harmful
gases (incl. VOC, odor, etc.) detected.
L1 indicates best air quality.
To Next Page
Loading...
