Philips AC4550 - Changing the Auto Mode Setting

32 EN
3 Touch and hold the button for
3 seconds to switch o the air
purier.
Note
• If the air purier stays connected
to the electrical outlet after
turning OFF, the air purier will
operate under the previous
settings when turned ON again.
Changing the Auto mode
setting
You can choose 4 auto modes: the
general mode, the Pollution mode,
the Gas mode or the Allergen mode.
Auto general mode
The Auto general mode is designed
to fast respond to even the slightest
change in the air that automatically
adjust fan speed to ensure optimal
performance.
• Touch the Auto mode button
to select Auto general mode .
» Auto ( ) displays on the
screen for 3 seconds.
» Then the screen shows the
hightest level among PM2.5/
Gas/IAI.
Auto pollution mode
The specially designed auto
pollution mode responds to real
time particle level and eectively
remove airborne pollutants such as
PM2.5.
• Touch the Auto mode button
to select the Auto pollution mode.
» The PM2.5 level displays on
the screen.
Auto Gas mode
The specially designed Auto Gas
mode is designed to quickly remove
indoor harmful gases such as
formaldehyde, toluene, and maintain
it at safe level.
• Touch the Auto mode button
to select the Auto Gas mode.
» The Gas level displays on the
screen.