30
English
Smart Calc-Clean System
Your appliance has been designed with a Smart Calc-Clean system to ensure that
descaling and cleaning is done regularly. This helps to maintain a strong steam
performance and prevents dirt and stains coming out of the soleplate over time.
To ensure that the cleaning process is performed, the appliance gives regular
reminders.
Performing the Calc-Clean process with the Calc-Clean
container
Warning: Do not leave the appliance unattended during the Calc-
Clean process.
Caution: Always perform the Calc-Clean process with the Calc-Clean
container. Do not interrupt the process by lifting the iron up from the Calc-
Clean container, as hot water and steam will come out of the soleplate.
Note: Make sure that the appliance is plugged in and switched ON during the
Calc-Clean process.
1 After 1 to 3 months of use, the Calc-Clean light starts flashing and the
appliance starts beeping to indicate that you must perform the Calc-Clean
process.
2 Besides that, a second defense step to protect the appliance from scale is
integrated: the steam function gets disabled if descaling is not done. After
descaling is done, the steam function will be restored. This takes place
regardless of the type of water used.
3 Remove the water tank from the base.
To Next Page
Loading...
