33
English
14 Press and hold the Calc button for 2 seconds until you hear a short beep.
15 During the Calc-Clean process, you hear short beeps and a pumping sound.
Wait approximately 2 minutes for the appliance to complete the process.
Note: The Calc-Clean container has been designed to collect scale particles
and hot water during the Calc-Clean process. It is perfectly safe to rest the
iron on this container during the entire process.
16 When the Calc-Clean process is completed, the iron stops beeping and the
Calc light stops flashing. The iron will turn OFF.
Caution: The iron is hot.
17 Wipe the iron with a piece of cloth and put it back on the iron dock.
18 As the Calc-Clean container becomes hot during the Calc-Clean process, wait
about 5 minutes before you touch it. Then carry the Calc-Clean container to
the sink, empty it and store it for future use.
Note: During the Calc-Clean process, clean water may come out of the
soleplate if no scale has accumulated inside the iron. This is normal.
To Next Page
Loading...
