EasyManua.ls Logo

Philips Avalon FM20 - Page 162

Philips Avalon FM20
221 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 Printing the ECG Waveform
162
DECG and MECG waveforms
When the recorder is on, there are two choices for printing the ECG wave:
Separate: This recording mode gives you a six-second ECG strip on the fetal trace paper in fast
printout mode. As this is a real-time recording, the real-time fetal trace recording is temporarily
interrupted while the ECG strip prints. A new trace header is printed out to mark where the real-
time fetal trace resumes.
The following trace shows the MECG waveform:
Overlap: This recording mode gives you a delayed six-second snapshot of the maternal and/or
direct fetal ECG for documentation on the fetal strip, but without interrupting the fetal trace. It
takes 5 minutes to print this six-second snapshot at a recorder speed of 3 cm/min. It is
documented as if it was recorded at 25 mm/s.
1
DECG
2 MECG
3 Paper speed
1 Paper speed
2 Date

Table of Contents

Other manuals for Philips Avalon FM20

Related product manuals