Philips Avalon FM20 - Page 163

20 Printing the ECG Waveform
163
The following trace shows both the DECG and MECG waveforms:
To make your choice:
1 Enter the Main Setup menu by selecting the SmartKey .
2 Select Fetal Recorder to enter the Fetal Recorder menu.
3 Select ECG Wave to toggle between Separate and Overlap.
To print the ECG wave(s):
Either
Select the
Start ECG SmartKey .
Or
1 Enter the Main Setup menu by selecting the SmartKey .
2 Select Fetal Recorder to enter the Fetal Recorder menu.
3 Select Start ECG Wave.
Or
1 Select the ECG Wave.
2 Select Start ECG Wave in the ECG wave menu.
1 Paper speed
2 Date