Philips Avalon FM30 - Avalon FM20 and FM30

3 Basic Operation
20
The following Maternal Measurements are supported:
Avalon FM20 and FM30
This section outlines the capabilities of your monitor.
Avalon FM20
The Avalon FM20 fetal/maternal monitor provides a solution for external fetal monitoring
applications, and optional non-invasive maternal vital signs.
You can monitor fetal heart rates (FHRs) externally using ultrasound, uterine activity and maternal
pulse using an external Toco transducer, and the maternal heart rate (MHR) via maternal ECG
electrodes, and optionally, non-invasive blood pressure.
Measurements are displayed on a 6.5-inch color display as numerics. The display is a touchscreen, and
you operate the monitor using this touchscreen interface. The integrated recorder documents fetal and
maternal measurements as well as user defined annotations.
You can connect the monitor to an OB TraceVue system via the RS232 connection, or over a LAN
connection (with OB TraceVue Revision E.00.00 and later).
Fetal Monitor
or Model
Maternal
Heart Rate
(MHR) via
Maternal ECG
Electrodes
Maternal
ECG
(MECG)
Maternal Pulse
from Toco
Non-invasive Blood
Pressure with Pulse
Rate
Pulse Oximetry
(Maternal SpO
2
)
with Pulse Rate
FM20 Standard - Standard Optional -
FM30 Standard Standard Standard Optional Optional
FM40 Standard - Standard Standard Standard
FM50 Standard Standard Standard Standard Standard