3 Basic Operation
24
Rear
Left Side
Getting to Know Your Avalon FM40/FM50
Front
10 Display Release
11 Carrying Handle
12 Built-in Stand
13 SpO
2
Socket (optional)
14 Noninvasive Blood Pressure
Socket (optional)
15 Fetal Sensor Sockets - each
socket accepts any fetal
transducer, an Avalon CTS
Cordless Fetal Transducer
System base station (connected
via the interface cable M2731-
60001), or event marker
1 On/Standby Switch
2 Power LED
3 Recorder Paper Table
4 Touchscreen Color Display
5 Transparent Paper Guide with
tear-off edge
6 Paper Eject Button. Press to
open paper drawer. Press again
and hold when removing paper.
7 Fetal Sensor Sockets. Connect
any fetal sensor or patient
module here, including Avalon
CTS via M2731-60001 interface
cable (with red connector).
8 Noninvasive Blood Pressure
Socket
9 SpO
2
Socket
To Next Page
Loading...
