7 Admitting and Discharging
84
Editing Patient Information
To edit the patient information after a patient has been admitted, select the patient name field on the
main screen of the fetal monitor to open the
Patient Demographics window, and make the required
changes.
Discharging a Patient
You should always perform a discharge even if your previous patient was not admitted. A discharge:
– clears the information in the
Patient Demographics window.
– resets all monitor settings to the settings defined in the User Default.
– advances the paper automatically if the recorder is running.
– stops the fetal recorder.
When a patient is discharged from the monitor, all patient demographic data is deleted (trace data is
not affected).
To discharge a patient,
1 Select the patient name field to display the Patient Demographics window and associated pop-up
keys.
2 Select the pop-up key for Dischrge Patient.
3 Select Confirm to discharge the patient.
CAUTION
In order to ensure that the settings are reset to user defaults for a new patient, always discharge the
previous patient from the fetal monitor.
NOTE
In order to ensure a continuous record, it is recommended to discharge the patient before performing
a new patient admission in OB TraceVue.
New Patient Check
The fetal monitor can be configured to ask you in certain situations:
• after a specified power-off period
• after a specified standby period
whether a new patient is now being monitored. The pop-up window is entitled
Is This A New Patient?
The monitor offers a
Yes key to discharge the previous patient and begin monitoring a new patient and
a
No key to continue monitoring with the current patient data and settings.
The time periods for the two conditions can be configured independently.
To Next Page
Loading...
