3 Basic Operation
31
Pop-Up Keys
Pop-up keys are context-sensitive graphical keys that appear automatically on the monitor screen when
required. For example, the
Confirm pop-up key appears when you need to confirm a change.
Using the Touchscreen
Select screen elements by pressing them directly on the monitor's screen.
Disabling Touchscreen Operation
To temporarily disable touchscreen operation of the monitor, press and hold the Main Screen
permanent key for about three seconds. A red padlock will blink on the
Main Screen permanent key.
Press and hold the
Main Screen permanent key again for about three seconds to re-enable the
touchscreen operation.
Start/ Stop:
- start/stop manual noninvasive
blood pressure measurement
- start auto series
- stop current automatic
measurement within series
Stop All - stop all noninvasive blood
pressure measurements
Start NBP:
- start manual noninvasive blood
pressure measurement
- start auto series
Stop NBP:
- stop manual noninvasive blood
pressure measurement
- stop current automatic measurement
within series
Repeat Time - set the time interval
between two noninvasive blood
pressure measurements
Defaults - load User Default
Sound Vol. Up - increases the
Fetal Heart Rate volume
Sound Vol. Down - decreases the
Fetal Heart Rate volume
Monitor Standby - enter Standby
mode, suspends monitoring. All
numerics and waves disappear
from the display. All settings and
patient data information are
retained.
NST Report - initiate an NST trace
interpretation and obtain a Non-
Stress Test (NST) Report
To Next Page
Loading...
