Philips BDP2590B/98 - 2 Change settings; Picture; Sound

8 EN
2 Change
settings
This section helps you change the
settings of this player.
Note
• You cannot change a menu option that is
grayed out.
• To return to the previous menu, press .
To exit the menu, press .
Picture
1 Press .
2 Select [Setup] > [Video] to access
the video setup options.
• [TV display]: Select a picture display
format to t the TV screen.
• [HDMI video]: Select an HDMI video
resolution.
• [HDMI Deep Color]: Display colors
with more shades and hues when
the video content is recorded in
Deep Color and the TV supports this
feature.
• [Picture settings]: Select a
predened color setting.
1
3
2
3
Watch 3D video
TV display
HDMI video
16:9 Widescreen
Picture settings
• [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D
disc. The player must be connected
to a 3D TV through HDMI.
Note
• If you change a setting, make sure that the
TV supports the new setting.
Sound
1 Press .
2 Select [Setup] > [Audio] to access
the audio setup options.
• [Night mode]: Select quiet or
full dynamic sound. Night mode
decreases the volume of loud
sound and increases the volume of
soft sound (such as speech).
• [HDMI audio]: Set an HDMI
audio format when this player is
connected through HDMI.
• [Digital audio]: Select an audio
format for the sound output when
this player is connected through a
digital connector (coaxial).
• [PCM downsampling]: Set the
sampling rate for PCM audio output
when this player is connected
through a digital connector
(coaxial).
Note
• For settings related to HDMI, the TV must
be connected through HDMI.
• Night mode is only available for Dolby
®
TrueHD / Dolby
®
Digital Plus encoded DVD
and Blu-ray discs.
BDP2590B_98_UM_V2.0.indb 8 10/10/2016 2:17:27 PM