EasyManua.ls Logo

Philips BDP2590B/98 - 5 Trouble­shooting

Philips BDP2590B/98
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 EN
Support HDD (a portable hard disc
drive): an external power source
may be needed.
Main unit
Power supply rating: 110-240V~ or
220-240V~, 50Hz -60Hz
Power consumption: 10 W
Power consumption in standby
mode: < 0.5 W
Dimensions (w x h x d):
270 x 41 x 199.3 (mm)
Net Weight: 0.92 kg
Operating Temperature & Humidity
0°C to 45°C, 5% to 90% Humidity for
all climates.
Storage Temperature & Humidity
-40 °C to 70 °C, 5% to 95%
Accessories
Remote control and batteries
User manual
HDMI cable
Laser
Laser Type (Diode): AlGaInN (BD),
AlGaInP (DVD/CD)
Wave length: 398nm to 413nm (BD),
645nm to 664nm (DVD),
770nm to 800nm(CD)
Output power: 1.7mW (BD),
0.19mW(DVD), 0.25mW (CD)
Standby information
When the product remains inactive
for 18 minutes, it automatically
switches to standby or networked
standby.
The power consumption in standby
or networked standby is less than
0.5W.
5 Trouble-
shooting
Warning
Risk of electric shock. Never remove the
casing of the player.
To keep the warranty valid, never try to
repair the player yourself.
If you have problems using this player,
check the following points before
you request service. If you still have a
problem, register your player and get
support at www.philips.com/support.
If you contact Philips, you will be asked
for the model and serial number of this
player. The model number and serial
number are on the back of this player.
Write the numbers here:
Model No. _________________________
Serial No. _________________________
Main unit
The buttons on this player do not work.
Disconnect this player from the power
supply for a few minutes, and then
reconnect.
Picture
No picture.
Make sure that the TV is switched
to the correct source input for this
player.
No picture on HDMI connection.
Make sure that the HDMI cable is not
faulty. If it is faulty, replace with a new
HDMI cable.
On the remote control, press and
then press “731” (numeric buttons)
to recover picture display. Or wait for
10 seconds for auto recovery.
BDP2590B_98_UM_V3.0.indb 14 1/11/2016 4:06:00 PM

Related product manuals