10 EN
• [Software update]: Update software
through a USB storage device.
• [Clear memory]: Delete the previous
BD-Live download on the USB
storage device. A "BUDA" folder is
automatically created to store the
BD-Live download.
• [DivX
®
VOD Code]: Display the
DivX
®
registration code or the
deregistration code for this player.
• [Version information]: Display the
software version of this player.
• [Restore default settings]: Reset
this player to the default settings
made at the factory, except for
password and parental control level.
Note
• You cannot restrict Internet access on
commercial Blu-ray discs.
• Before you purchase DivX videos and play
them on this player, register this player on
www.divx.com with the DivX VOD code.
3 Update
software
Before you update the software of
this player, check the current software
version:
• Press , and then select [Setup] >
[Advanced] > [Version information],
and press OK.
Update software via USB
1 Check the latest software version on
www.philips.com/support.
• Search for your model and click
on "Software and drivers".
2 Download the software into a USB
storage device.
a Unzip the download, and make
sure that the unzipped folder is
named "UPG".
b Put the "UPG" folder in the root
directory.
3 Connect the USB storage device
to the (USB) connector on this
player.
4 Press , and select [Setup].
5 Select [Advanced] > [Software
update]> [USB].
» If an upgrade media is detected,
you are prompted to start the
update.
6 Follow the instructions on the TV
screen to update the software.
» When the update is complete,
this player automatically turns
o and on again.
BDP2590B_98_UM_V2.0.indb 10 10/10/2016 2:17:27 PM
To Next Page
Loading...
