Philips BFL2114/27 Series - Capture Logs from TV on USB

- 139 -
{
"Svc": "OfflineServices",
"SvcVer": "4.0",
"Cookie": 299,
"CmdType": "Change",
"Fun": "ApplicationControl",
"CommandDetails": {
"ApplicationDetails": {
"ApplicationName": "Googlecast",
"ApplicationAttributes": {
"Messages": [
{
"Language": "eng",
"MessageTitle": "Example Hotel T&C",
"MessageBody": "By continuing, you agree with the terms and
conditions as mentioned on http://www.examplehotel.com/wifiaccess"
},
{
"Language": "fre",
"MessageTitle": "Exemple d’hôtel T&C",
"MessageBody": "En continuant, vous acceptez les termes et
conditions mentionnés sur http://www.examplehotel.com/wifiaccess"
}
]
}
}
}
}
12.6 Capture logs from TV on USB
Sometimes if you would have a problem, it can be requested by the technical team to share a clone
file and logs of the issue you have reported.
To make logs you need to do following steps:
 Create a new text file on a FAT32 formatted USB stick
 Rename the "New Text Document.txt" file to "TPVisionDebug.cookie" (including renaming the
.txt into .cookie)
 Connect the USB to TV
 Reproduce the problem you have
 Send 456789 info (notification should be seen that it's save to disconnect the USB), in case you
do not have a RC with digits or the info button you put the TV to STBY and power off the TV
before disconnecting the USB.
 After reproduction is done, disconnect the USB stick again from TV and zip the
"TPVisionDebug" folder and share it with the technical team