Philips BFL2114/27 Series - Virgin Installation Wizard; Instant Initial Cloning (IIC); Virgin Installation; Instant Initial Cloning and Software Upgrade

- 21 -
Select [Yes] and press the “OK” button to reinstall the TV. You will see that the TV will apply a reset
and restart into IIC mode.
4.2 Reinstall via a script in the clone file
To automatically reinstall the TV, load a new clone file and load new SW you can use this script.
In the ‘MasterCloneData’ folder you can add a folder called ‘Script’. In this folder you have to put a
script called ‘Script.xml’.
This xml file has as content below:
<?xml version='1.0' encoding='UTF-8' ?>
<Script>
<SchemaVersion MajorVerNo="1" MinorVerNo="0" />
<Activity>
<Action>ReinstallTV</Action>
</Activity>
</Script>
If you have this file in the correct location and you Clone USB to TV then in the beginning of the cloning
process the TV will give a notification ‘Reinstall TV’ and the TV will be reinstalled.
After the reinstallation the TV will be in IIC mode, if you have new SW on the USB device the TV will be
upgraded, after this the new clone file will be loaded to the TV.