o Navigate to the [Wireless and Networks]
[Control TV Over IP] [WebListeningServices]
menu
o Web Listening Services is a mechanism to
exchange information from the server to the
TV. This enables a small server to run inside
the TV that listens to services sent from the
server.
o You will see below items:
o [PowerService]: PowerService feature
shall enable to remotely Request for the
current status of the TV or change the
Power Status of the TV, this can be put
[Off] or [On]
o [TVDiscoveryService]: TV Discovery
Service is the Web Service through which
a Web Server will detect the presence of
TVs in the IP Network using the TV Serial
Number and Production code (and other
data). You can put this option [Off] or [On]
o [IPUpgradeService]: This will allow
cloning and software update of the TV
over IP via CMND, this can be put [Off] or
[On]
o [PMSService]: This will allow the PMS
feature to communicate, this can be put
[Off] or [On]
o [Port Settings]: Using this menu you can
set the [WLS Port], this used to be set
9080 and was changed by default to 9079
linked to the upgrade from Android N to
Android P
o Navigate to the [Input control] [Local Keyboard
Control Lock] menu
o You will see below items:
o [Off]: All local keyboard buttons are enabled
o [On]: All local keyboard buttons are disabled
except for the power button
o [All]: All local keyboard buttons are disabled
including the power button
Note: Local keyboard buttons are the buttons on
the backside of the TV
To Next Page
Loading...
