o Navigate to the [Input control] [Remote Control]
menu
o You will see below items:
o [Lock]: The TV will not respond to any RC codes
sent to TV by putting Lock to [On], normally
this should always be [Off]
Note: Using the master RC you would still be
able to enter in the professional menu and
navigate in it
o [SmartInfo RC Key Mapping]: You can map the
“SmartInfo” button on the RC to different apps
Note: The list will be depending on
enabling/disabling of features and installed
apps
o [TV Menu RC Key Mapping]: You can map the
“TV Menu” button on the RC to different apps
Note: The list will be depending on
enabling/disabling of features and installed
apps
o [Watch TV RC Key Mapping]: You can map the
“Watch TV” button on the RC to different
sources and to different apps installed on the
TV
Note: The list will be depending on
enabling/disabling of features/sources and
installed apps
o Navigate to the [Input control] [Multi Remote
Control] menu
o This function allows that up to 14 televisions can
be installed in a room whereas each TV will react
to its own RC
o You will see a list of options (‘Off’, the 4 color keys
and all digits)
o The TV will only react on the RC that is
programmed linked to your selection
Note: The TV will still respond to the master RC
o Once the TV is set to some value other than [Off],
also the RC should be programmed to the same
selection to still work with the TV
To Next Page
Loading...
