- 73 -
o Navigate to the [System Settings] menu
o You will see below items:
o [WLSViaCDB]: Using [On], you can
enable WebListeningServices via CDB
or disable using [Off]
o [Render CDB Acc]: This menu is
deprecated and will be removed
trough SW upgrade
o [Delete Account and Clear History]:
This menu is to logout and clear your
history
o [Debug CDB]: This will enable the CDB's
HTML and JS to be debugged via
chrome inspector
o Navigate to the [Diagnostic Logging]
menu
o You will see below items:
o [Enable]: You can enable diagnostic
logging via [Yes] or disable it via [No]
o [Destination]: You can set the location
where the data should be stored to
[Internal], [Portal], [USB] or [Server].
Note: [Portal] needs to be selected in
order to have Netflix available
o [Server URL]: You can set the server url
to where the logs need to be stored
Note: This will only be selectable when
[Destination] is set to [Server]
o [Frequency]: This is the frequency
interval in seconds for diagnostic
logging
o Navigate to the [Select TV Control App]
menu
o You will see below items:
o [Off]: You can use the TV in normal
mode
o [Crestron Connected]: You can use the
TV in normal mode and you can also
control the TV using Crestron Connect.
When you press “OK” you will open the
configuration wizard of the Crestron
connect
Note: See more details in the ‘Crestron
Connected wizard’ chapter
To Next Page
Loading...
