Philips CED1500BT - Play from hard media; Load a disc; Connect a USB storage device

10 EN
4 Get started
Caution
 Risk of car accidents! Never watch video or operate
this system while driving.
Prepare the remote control
)RUWKHÀUVWWLPHXVH
Pull the protective sheet out.
» The remote control is ready for use.
Replace the battery
Caution
 Risk of explosion! Keep batteries away from heat,
VXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHVLQÀUH
Note
 Remove the battery if it is exhausted or if the remote
control is not to be used for a long time.
 Batteries contain chemical substances, they should be
disposed of properly.
1 Pull out the battery tray.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3 Insert the battery tray.
Turn on
Press .
» PHILIPS logo and a progress bar are
displayed while boot-up.
 To turn off the system, press and hold
for 3 seconds.
)RUWKHÀUVWWLPHXVH
After successful boot-up, the following interface
is displayed.
1 Tap [Language] to select a language for
on-screen display.
2 Tap [Radio Region] to select a radio
region that matches your location.
3 Tap [Finish] to complete the initial setup.
» The device switches to radio mode
automatically.
Use the home menu
Note
 If is displayed when you touch an icon, it indicates
that the selected media or feature is unavailable at the
current time.