8239 300 38592
● Connect the AV receiver’s COAXIAL
OUT jack to the DIGITAL (COAXIAL)
IN jack on a digital recording device
(DTS-Digital Theatre System compatible,
with a Dolby Digital decoder, for
example).
➜ This will allow you to make digital or
analogue recordings from the signals
received from this AV receiver.
AND/OR
● Connect the AV receiver’s AUDIO
OUT jacks to the AUDIO IN jacks on an
analogue recording device.
➜ This will allow you to make analogue
stereo (two-channel, left and right)
recordings.
Helpful Hints:
– Dolby Digital, DTS or MPEG signal are not
possible to record from this AV receiver.
– Digital recording is not possible when the
digital source material is copy-protected.
Before starting recording,
1 Press DISC, TUNER, TV or AUX to
select the source you want to record
from.
➜ The name of the source appears on
the display panel.
2 Start recording on the external recording
device.
3 Start playback on the connected source
as usual.
Helpful Hints:
– Recording from 6 Channel input source is
not possible.
– The sound settings will not affect the
recording.
Connecting to a recording
device
Optional Connections - Recording
L
To Next Page
Loading...
