Philips DVDR3455H - Setup Menu Options (continued); Audio Setup Options

English
73
AUDIO settings (underlined options are the factory default settings)
SPDIF Output

Press X to access this menu and use ST keys to select one
of the options.
{ RAW } – Select this if you have used the recorder’s
COAXIAL (DIGITAL AUDIO) jack to connect to
a multichannel receiver.
{ LPCM } – Select this if you have used the recorder’s
COAXIAL (DIGITAL AUDIO) jack to connect to
a stereo or audio/video system.
LPCM Output This setting allows you to select between two levels:
{ LPCM 48 kHz} – Select this if the connected audio device is
capable of processing digital signal input with
sampling rates of 48 kHz. In addition, the disc
you are playing back must be recorded in 48kHz
LPCM format.
{ LPCM 96 kHz} – Select this if the connected audio device is
capable of processing digital signal input with
sampling rates of 96 kHz.In addition, the disc
you are playing back must be recorded in 96kHz
LPCM format.
Setup Menu Options (continued)