1.6. Dismantling of the HDMI Board
1) Remove 2 screws on the Rear Plate 230 as shown in figure 11 to dismantle the HDMI Board 1006.
Figure 11 – HDMI Board mounting screws
2) Remove the HDMI Shield 190 for HDMI Board service position as shown in figure 12.
Figure 12 – HMDI Board Service Position (HDMI Shield Removed)
1.7. Dismantling of the HDD
1) Remove 4 screws to loosen the HDD assembly (HDD 1005+ HDD Bracket 186+ the screws 271+ HDD
Damper 191 only for DVDR3595H & DVDR3597H + HDD Suspension Bracket 192 only for DVDR3595H &
DVDR3597H) as shown in figure 11.
To Next Page
Loading...
