Philips EasyKey 6000 Series - PIN Code Management

11
◆How to enter master mode:
Enter [#] before you enter any other
numbers, then enter master PIN code and
conrm with [#].
Enter the new master PIN code and conrm
with [#].Re-enter the new master PIN code
and conrm with [#].After hearing a voice
prompt of “Succeeded”, press [*] several
times until you exit master mode.
Press [1] to modify master PIN code.
1
Press [#], enter master PIN code and conrm
with [#].
Modify master PIN code
User settings
Press [#], enter master PIN code and
conrm with [#].
Press [2] to enter user registration, then press [1]
to register a new user PIN code, which will be
automatically numbered and broadcasted by the
system.
1
Register a user PIN code
Enter a user PIN code of 6 to 12 digits,and
conrm with [#]. Then re-enter the user
PIN code and conrm with [#]. After
hearing a voice prompt of “Succeeded”,
press [*] several times until you exit master
mode.
Enter a one-time user PIN code of 6 to
12 digits and conrm with [#]. Re-enter
the one-time user PIN code and conrm
with [#]. After hearing a voice prompt of
“Succeeded”, press [*] several times until
you exit master mode.
Enter [2] to enter user settings, then enter [2] again
to add a one-time PIN code.
2 2
Register a one-time user PIN code
Press [#], enter master PIN code and
conrm with [#].
2
1
Light up the
keypad
2