How to stop low battery alarm on Philips EasyKey?
When the Philips Door locks' battery is low, the alarm will be automatically turned off. It prompts you to replace the batteries in time and you'll hear a voice prompt of 'Low battery. Please replace all batteries' during unlocking.
What to do if Philips Door locks have a low battery voltage alarm?
If your Philips Door lock is alarming due to low battery voltage, replace all the batteries.
How to use emergency power supply for Philips Door locks?
When the battery voltage is insufficient and the door cannot be opened from the outside, you can power up the lock through the Micro USB interface by using a 5V power bank as an emergency power supply.
What to do if Philips EasyKey Door locks system crash prevents door opening?
If a system crash is preventing your Philips door lock from opening, press the Reset button and then release it to let the system reboot automatically.
How to turn off inside unlocking alarm on Philips Door locks?
The inside unlocking alarm on Philips Door locks, when under outside forced lock mode, can be turned off by a successful verification of any type.
General| Brand | Philips |
|---|---|
| Model | EasyKey |
| Category | Door locks |
| Language | English |
Safety guidelines and warranty conditions for using Philips EasyKey.
Warnings related to product usage, power supply, and environmental exposure.
Instructions for environmentally responsible disposal of used products and batteries.
Reference list of all components included in the product packaging.
Diagram illustrating all parts of the smart door lock assembly.
Steps to check door opening direction and switch between push and pull mechanisms.
Detailed guide for mounting the smart door lock components onto the door.
Identification and description of the external components of the lock.
Identification and description of the internal components of the lock.
Overview of General mode and Dual verification mode for lock operation.
Procedures for registering and managing user PIN codes and fingerprints.
Steps to delete specific user PIN codes, fingerprints, and cards from the system.
Resetting to factory settings and adjusting language, volume, and verification modes.
Retrieving serial number, software version, and managing Bluetooth connectivity.
Information on network connectivity and app integration for enhanced features.
Methods to unlock the door from the exterior using PIN, fingerprint, or card.
Explanation and operation of the automatic and manual locking modes.
Procedures for unlocking the door from the interior using the handle or close button.
Function to lock the interior handle to prevent unlocking from inside.
One-button procedure to reset all user information and return to factory settings.
Explains the meaning of the lock status light colors (Blue, Green, Red).
Indicates the meaning of the low battery warning light and prompt.
Explains the indicator light for the outside forced lock function status.
Shows the indicator light status for mute mode (off or on).
Indicates the status of the inside deadlock mode and its effects.
Explains the meaning of light flashes on the [Close] button.
Details on various alarm triggers, modes, and how to turn them off.
Procedure for powering the lock using an external source during low battery.
Instructions for accessing and replacing the lock's power source (batteries).
To Next Page