What to do if Philips Door locks cannot be opened from outside due to low battery?
If you cannot open your Philips Door locks from the outside due to low battery voltage, power up the lock by plugging a 5V power bank into the micro Emergency power supply interface.
How to recognize low battery in Philips Door locks?
When the Philips Door lock has a low battery, you'll hear a voice prompt saying "Low battery, please replace the battery" during unlocking.
How to fix low battery alert on Philips Door locks?
If you receive a low battery alert on your Philips Door locks, it means the battery voltage is low. Please replace all the batteries to resolve this issue.
How to fix a system crash on Philips Door locks?
If your Philips Door locks system crashes, press and release the reboot button to restart the system.
What does fast flashing green mean on Philips EasyKey 7000?
Fast flashing green indicates that the infrared sensor unlocking is on.
What does fast flashing red mean on Philips Door locks?
Fast flashing red indicates that the infrared sensor unlocking is off.
What does red light flashing once mean on Philips Door locks?
A red light flashing once indicates that the door is under the deadlock mode.
What does green light flashing twice mean on Philips EasyKey 7000 Door locks?
A green light flashing twice indicates that the door is unlocked successfully.
What does red light flashing twice mean on Philips EasyKey 7000 Door locks?
General| Brand | Philips |
|---|---|
| Model | EasyKey 7000 Series |
| Category | Door locks |
| Language | English |
Essential safety guidelines for using the Philips EasyKey smart lock, including handling and usage.
Warnings and precautions regarding product operation, environmental exposure, and component handling.
Guidelines for the responsible disposal of used products and batteries to protect the environment.
Details the complete list of items included in the Philips EasyKey packaging for installation.
A detailed diagram showing all components of the Philips EasyKey lock for assembly reference.
Instructions for determining door swing direction and preparing the latch bolt orientation before installation.
Provides sequential instructions for the physical installation of the Philips EasyKey smart lock on the door.
Identifies and describes the parts and features of the exterior door lock unit.
Identifies and describes the parts and features of the interior door lock unit.
Steps to perform before the main setup, including mode selection and user information.
Instructions on how to access and navigate the master control mode of the EasyKey.
Guidance on changing the default master PIN code for enhanced security and access.
Detailed steps for registering new users, including PIN codes and fingerprints.
Instructions for creating temporary PIN codes for guest access.
Procedures for deleting single user PIN codes, all PIN codes, one-time codes, and fingerprints.
Steps to reset the device to factory default settings and initialize the system.
Guides on configuring system settings, including language selection.
Adjusting audio volume levels and managing different locking modes for the smart lock.
Instructions for enabling and switching to dual verification mode for enhanced security.
How to access and utilize advanced features and network connectivity options.
Methods for checking the device's serial number and software version.
A list of shortcut keys for quick access to specific functions like checking serial numbers or enabling video.
Instructions for downloading the app and pairing the smart lock with a mobile device.
Methods for unlocking the door using PIN code, fingerprint, rotary knob, button, or infrared sensor.
How to lock the door normally and enable the inside deadlock feature for added security.
Instructions for using the physical key to unlock the door in case of emergencies.
Enabling and using the infrared sensor for convenient unlocking from the inside.
Activating a mode that alerts if the door is unlocked from the inside while in a forced lock state.
How to mute the lock's sounds and voice prompts for quiet operation.
Procedure to reset the EasyKey to its original factory settings, clearing all user data.
How the doorbell feature works, including notifications and video capture via the app.
Using the app to view the front door and communicate with visitors in real-time.
Explains the meaning of different colored lights indicating the lock's current status (locked, unlocked, etc.).
Alerts and indicators for when the battery level is critically low, requiring replacement.
Indicates when the outside forced lock mode has been enabled or is active.
Shows the indicator light status for when the mute mode is active or inactive.
Details how the system indicates when the inside deadlock feature is engaged.
Explains the flashing patterns that indicate the system is temporarily locked due to incorrect inputs.
Meaning of the indicator lights associated with the [OPEN/CLOSE] button and door lock status.
Shows the indicator lights for the infrared sensor unlocking feature when it is on or off.
Describes various alert types and provides methods to resolve them.
Specific alerts triggered when unlocking from inside while in outside forced lock mode.
Information on alerts related to low battery voltage and reminders to replace batteries.
Alerts for tampering attempts and abnormal deadbolt operation.
Details on motion sensor alerts, their triggers, and how to manage them via the mobile app.
Instructions on how to charge the EasyKey in an emergency using a power bank.
Step-by-step guide on how to safely replace the lithium battery in the smart lock.
Information on charging the lithium battery using a USB port and battery specifications.
To Next Page