Philips EasyKey 6000 Series - Page 15

13
3
删除一次性用户密码
2
Delete a one-time PIN code
Press [#], enter master PIN code and conrm
with [#].
Enter [3] to enter user record deletion
and enter [2] to delete one-time PIN
code.
After hearing a voice prompt of “Succeeded”,
press [*] several times until you exit master
mode.
3 3 1
Delete a ngerprint
Press [#], enter master PIN code and conrm
with [#].
Enter [3] to enter user record deletion
and enter [3] to enter ngerprint
deletion, then enter [1] to delete a
single ngerprint.
Enter a two-digit user code (from 00 to 99)
which a ngerprint is to be deleted and
then conrm with [#]. After hearing a voice
prompt of “Succeeded”,
keep pressing [*] until you nally exit the
master mode.
3 3
2
Delete all ngerprints
Press [#], enter master PIN code and conrm
with [#].
Press [3] to enter user deletion, then press
[3] again to enter ngerprint deletion. Press
[2] to delete all ngerprints. After hearing a
voice prompt of "Succeeded", press [*] several
times until you exit master mode.
3
4
1
Delete a keytag
Press [#], enter master PIN code and conrm
with [#].
Enter [3] to enter the deletion of user
information and enter [4] to enter the
deletion of keytag, then enter [1] to delete
a single keytag. Enter a two-digit user code
(from 00-99) which a key tag is to be deleted
or place a keytag to be deleted against the
keytag reader. After hearing a voice prompt
of “Succeeded", keep pressing [*] until you
nally exit the master mode.