Philips EasyKey DDL709-FVP-7HWS - Other Features; Indoor Infrared Unlock; Outside Forced Lock

17
Infrared sensor
Touch sensor
Function：
When this function is enabled, you
could unlock the door from inside.
How to use：
When the touch sensor and infrared
sensor are on, touching the touch
sensor and infrared sensor on the
handle can unlock the door.
Infrared handle:
When the infrared handle is o, long
pressing the [OPEN] and [CLOSE]
buttons for 10 seconds can enable the
infrared handle.
When the infrared handle is on, long
pressing the [OPEN] and [CLOSE]
buttons for 10 seconds can disable the
infrared handle.
Function:
Unlocking from inside will trigger
an alert.
How to use:
After the door is locked, press [8] to
enter the outside forced lock mode.
Functional button
Attention
Attention
When the infrared handle is o, you will not be
able to unlock the door from inside. When your
hand touches the touch sensor and the infrared
sensor, the red light will light up to remind you
that the infrared handle is o.
The outside forced lock mode will not aect the
normal unlocking from outside.
6 Other features
Indoor infrared unlock
Outside forced lock