24
Deadbolt abnormality alert
Motion detection alert
Ultrasound
sensor
Triggering: If the deadbolt works
abnormally, the door fails to lock or unlock.
Alert mode: Continuously repeated alert.
Off: The alert will be automatically off.
Triggering: When a suspicious person
is loitering around at the front door for
a period that exceeds the set value, the
loitering alert will be triggered.
Alert mode: The camera will capture a video
by default and send a notification to the
APP.
Off: Motion detection is off by default, if
you need to use this feature, you can enable
or disable it on the APP.
Attention
1. The motion detection alert is o by default. To enable this feature, please log in to the APP, bind the
door lock on home page. Once the binding process is done, go to "Settings" and turn on "loitering alert".
2. The more the video function used, the faster the power consumption will be. To reduce the detection
frequency and battery consumption, it is suggested to set the motion detection sensitivity level to "Low".
To Next Page
Loading...
