Philips EP 800 Series - Page 12

12
Philips EP Series
Procedure to measure the temperature of the milk.
1. Place the beaker under the milk spout.
2. Dispense 100gr of milk froth.
3. Measure the temperature immediately after milk froth is dispensed, you need to nish the
measurement within 5 seconds.
4. The temperature is measured by placing the probe of the thermometer ± 10mm above the bottom
of the beaker.
5. Then stir the probe for 3 to 5 times and read out the thermometer values during stirring, values
should stabilize.
6. Hold the probe still in the center of the beaker and read out the temperature.
Technical information