8
Installation
Define Decoder/Descrambler programme numbers
If a decoder or a descrambler is connected, see p. 20, you can define one or
more programme numbers as decoder programme numbers.
& Select Decoder/Descrambler in the INSTALLATION menu and press the
OK key.
é Select the programme number with the cursor up/down. Select the
programme number under which you have stored the programme coming
from your decoder with the digit keys
“ Select Decoder Status with the cursor up/down.
• Press the cursor left/right to select the input used to connect your decoder:
TV, EXT1 or EXT2.
• Select
TV if you do not want the selected programme number being
activated as a decoder programme number.
‘ Use the red menu key to return or switch menu off.
If the TV is connected to a video recorder with the EasyLink function, the message
EasyLink: Downloading Presets.... appears at the bottom of the screen.
The programme list of the video recorder is equal again to the one of the TV.
DECODER/
DESCRAMBLER
Programme
Decoder Status
To Next Page
Loading...
