21
English
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
disc mechanism.
– Do not move the system during
playback. Doing so may damage the
system.
– Do not push on the disc tray or put
any object other than disc on the disc
tray. Doing so may cause the system to
malfunction.
– DVD discs and players are designed
with regional restrictions. Before playing
a disc, make sure the disc matches the
regional code of your player.
– According to the format requirement
of DVD or VCD, some operations may be
different or restricted.
Playing discs
Press DISC1/2/3 to select disc1/2/3 mode.
Power on the TV system and set to the correct
Video In channel .
➜ You should see the blue Philips DVD
background screen on the TV set.
Press OPEN/CLOSE to open the disc tray and
load a disc respectively in the first two disc trays.
To load the third disc, press DISC CHANGE.
➜ The disc tray will rotate until the empty tray is
ready for loading.
➜ Make sure the disc label is facing up. For
double-sided discs, load the side you want to
play facing down.
Disc Operations
Press OPEN/CLOSE to close the disc tray.
➜ “LOADING” will be displayed.
➜ In the stop mode, press DISC1/2/3 on the
remote control repeatedly to select DISC1,
DISC2 or DISC3 cyclially.
● Some discs can play automatically. For discs with
Table Of Contents, a menu may appear on the
TV screen. When the menu is displayed, press
1 / ¡ / 5 / 4 to highlight your selection
and press OK to confirm. To select a play
option, press numeric keys (0-9).
➜ If the disc is locked by parental control, you
must enter your six-digit password .
Press 38 to start playback.
For MP3/ DivX / WMA
● Load an MP3/DIVX/WMA disc in the disc tray.
➜ Press MENU to select File list , Folder or
Playlist ( if available).
Notes:
– oad discs with the label side facing up.
– To ensure good system performance, wait until
disc reading is completed before proceeding.
Using the Disc menu
For disc with Table Of Contents, a menu may
appear on the TV screen once you load the disc.
To select a playback feature or item
● Press 1 / ¡ / 5 / 4 or numeric keys
(0-9) on the remote control, then press 38 or
OK to start playback.
To access or remove the menu
● Press MENU on the remote control.
1
For Evaluation Only.
Copyright (c) by Foxit Software Company, 2004
Edited by Foxit PDF Editor
2
For Evaluation Only.
Copyright (c) by Foxit Software Company, 2004
Edited by Foxit PDF Editor
3
For Evaluation Only.
Copyright (c) by Foxit Software Company, 2004
Edited by Foxit PDF Editor
4
For Evaluation Only.
Edited by Foxit PDF Editor
5
To Next Page
Loading...
