English
36
Tape Operation/Recording
IMPORTANT!
– Recording is permissible if copyright
or other rights of third parties are not
infringed upon.
– Recording is possible only in tape deck
Preparation for recording
1
Load a recordable tape into tape deck with the
full spool to the left.
2 Prepare the source to the recorded.
DISC1/2/3 – load the disc.
USB – insert a USB driver.
AUX/MP3 LINK – connect external
equipment.
3 Press DISC1/2/3, USB or AUX/MP3 LINK
to select the source.
4 Start to play the selected source.
5 Press ● to start recording.
To stop recording
● Press 70 on the system.
Disc synchro recording
1
Press DISC1/2/3 to select the disc mode.
● You can record programmed tracks in the order
you want.
2 Press ● to start recording.
➜ “REC” will flash, but the first 7 seconds of the
start passage will not be recorded.
Selecting another track during recording
1 Press ;.
2 Press O or P to select another track.
3 Press ; to resume recording.
To stop recording
● Press 70.
➜ Recording and disc playback will stop
simultaneously.
The making of unauthorized copies of copy-
protected material, including computer
programmes, files, broadcasts and sound
recordings, maybe an infringement of copyrights
and constitute a criminal offence. This equipment
should not be used for such purposes.
FWD397-98_UM ENG_0514 2008.5.14, 15:5336
To Next Page
Loading...
