7 Thoroughly clean the inside of the coffeemaker with a damp cloth.
8 Before you slide the brewing unit back into the coffeemaker, make
sure the two reference signs on the side match. If they do not match,
perform the following step:
- Make sure that the lever is in contact with the base of the brewing unit.
9 Make sure that the locking hook of the brewing unit is in the
correct position. The hook is not correctly positioned if it is still in
bottommost position.
- To position the hook correctly, push it upwards until it is uppermost
position.
ENGLISH 17
4203_000_7242_2_DFU-Luxury_A5_v1.indd 17 1/9/13 1:37 PM
To Next Page
Loading...
