4 Slide the drip tray into the guiding grooves in the front of the
coffeemaker.
Note: Make sure the drip tray is fully inserted.
Never remove the drip tray when the coffeemaker is brewing coffee.
5 Slide the detachable coffee spout into the coffeemaker.
Placing and removing the bean-funnels
For more information on the bean-funnels and movies on how to place them
on the coffeemaker, go to www.philips.com/senseo-sarista/support.
1 Pull the vertical tear strip down to remove the protective sleeve of
the bean-funnel.
2 Pull the round AROMA LOCK
®
seal off the bean-funnel.
3 Insert the screw thread of the bean-funnel properly into the
opening in the top of the coffeemaker (1). Then turn the bean-funnel
clockwise to fasten it (2).
ENGLISH 7
4203_000_7242_2_DFU-Luxury_A5_v1.indd 7 1/9/13 1:37 PM
To Next Page
Loading...
