Descaling cycle
1 Press the 1-cup button and the 2-cup button simultaneously for
3 seconds until the CALC CLEAN light starts to ash. When the
CALC CLEAN light ashes quickly, you can start the descaling cycle.
2 Remove and empty the water tank from the coffeemaker.
3 Pour the contents of a Philips SENSEO
®
SARISTA descaling solution
bottle (250ml) into the water tank and then add 1 litre of tap water
to ll the water tank to the MAX indication.
4 Slide the water tank back into the coffeemaker.
5 Remove the detachable coffee spout or the coffee jug from the
coffeemaker.
6 Make sure the drip tray is empty.
MAX
ENGLISH 21
4203_000_7242_2_DFU-Luxury_A5_v1.indd 21 1/9/13 1:37 PM
To Next Page
Loading...
