Filling the coffee bean container
1 Fill the coffee bean container with espresso beans.
Only use espresso beans. Never use ground coffee, unroasted coffee
beans or caramelised coffee beans, as this may cause damage to the
machine.
2 Put the lid on the coffee bean container.
Heating up the machine
During the initial heat-up process, fresh water ows through the internal
circuit to heat up the machine. This takes a few seconds.
1 Place a bowl under the hot water/steam wand or classic milk frother
and the coffee spout. Make sure the control dial points to the coffee
bean icon.
2 Press the on/off button.
3 When the warning light ashes quickly, turn the control dial to the
hot water icon and wait a few seconds.
, The warning light goes out and some water comes out of the hot
water/steam wand or classic milk frother.
ENGLISH10
To Next Page
Loading...
