3 Turn the control dial back to the coffee bean icon.
Wait approximately 1 minute to let the descaling solution act.
4 Press the espresso button to brew a cup of espresso.
Wait approximately 1 minute to let the descaling solution act.
Note: During the descaling process, the coffee grinding function does not work.
If you press the espresso button, only water will ow out of the machine.
5 Repeat steps 2 to 4 until the ‘water tank empty’ light lights up
continuously.
Rinsing cycle
1 Remove the water tank from the machine and rinse it.
2 Fill the water tank with fresh tap water up to the MAX indication
and slide the water tank back into the machine.
3 Empty the bowl and place it back onto the drip tray under the hot
water/steam wand.
4 Press the espresso button and brew a cup of espresso.
Repeat this twice.
5 Turn the control dial to the hot water icon.
6 Let hot water ow out of the hot water/steam wand until the ‘water
tank empty’ light lights up continuously.
Note: If you want to interrupt the water ow, turn the control dial back to the
coffee bean icon. To restart the water ow, turn it back to the hot water icon.
ENGLISH22
To Next Page
Loading...
