4 Insert the small plug into the socket located on the back of
the machine.
5 Insert the plug into the wall socket.
6 Remove the protective sticker from the drip tray and slide the drip
tray into the guiding grooves in the front of the machine.
Note: Make sure the drip tray is fully inserted.
Preparing for use
Filling the water tank
1 Remove the water tank from the machine.
2 Rinse the water tank under the tap.
3 Fill the water tank with cold tap water up to the MAX indication.
Never ll the water tank with warm, hot or sparkling water,
as this may cause damage to the water tank and the machine.
4 Slide the water tank back into the machine.
ENGLISH 9
To Next Page
Loading...
