6 Turn the control dial to the hot water icon.
7 Let the water ow until the water tank is empty.
, The ‘water tank empty’ light lights up continuously.
8 Turn the control dial back to the coffee bean icon.
9 Fill the water tank with fresh water up to the MAX indication.
, The machine is ready for use.
Note: The rst cups of coffee may be a bit watery, this is normal.
The machine needs to complete a few brewing cycles to optimise its settings.
Installing the Intenza+ water lter
We advise you to install the Intenza+ water lter as this prevents scale
build-up in your machine. You can buy the Intenza+ water lter separately.
For more details, see chapter ‘Guarantee and support’, section ‘Ordering
maintenance products’.
1 Remove the small white lter from the water tank and store it in
a dry place.
Note: Please keep the small white lter for future use. You will need it for
the descaling process.
2 Remove the lter from its packaging and immerse it in cold water
with the opening pointing upwards. Press the sides of the lter gently
to let out the air bubbles.
ENGLISH12
To Next Page
Loading...
