14
ENGLISH
Automatic Rinse/Self-Cleaning Cycle
When warm-up has been completed, the machine automatically performs
a rinse/self-cleaning cycle of the internal circuits with fresh water. This
takes less than a minute.
5
Place a container under the co ee dispensing spout to catch the small
amount of water which will be dispensed.
6
The machine performs an automatic rinse cycle. Wait for the cycle to
nish automatically.
Note:
Dispensing can be stopped by pressing the “
” button.
YellowGreen
7
When the operations described above have been completed, the ma-
chine shows this display. You can now perform the manual rinse cycle.
Manual Rinse Cycle
During this process, the co ee brewing cycle is activated and fresh water
ows through the water circuit. This takes a few minutes.
1
Place a container under the co ee dispensing spout.
To Next Page
Loading...
