45
ENGLISH
45
Interruption of the Descaling Cycle
Once the descaling cycle has started, it must be completed; do not turn o
the machine mid-cycle.
If the machine stops, you can quit the cycle by pressing the on/o button.
If this occurs, or in the event of power failure or accidental disconnection of
the power cord, empty and rinse carefully the water tank, then ll it up to
the CALC CLEAN level.
Follow the instructions provided in the "Manual Rinse Cycle" chapter
before brewing any beverage.
If the cycle was not completed, the machine will require another descaling
cycle to be performed as soon as possible.
To Next Page
Loading...
