43
ENGLISH
43
Green Yellow
Rinse Phase
15
Press the “ ” button to start the rinse cycle.
Note:
The rinse cycle may be paused by pressing the
“ ”
button. To resume the
cycle, press the
“ ” button again
. This allows you to empty the container or
to leave the machine unattended for a short time.
16
When the amount of water needed for the rinse cycle has been com-
pletely dispensed, this icon is displayed. Press the “
” button to quit
the descaling cycle.
Note:
If the water tank is not lled up to
CALC CLEAN
level, the machine might
require the water tank to be lled up once more in order to complete the
rinse cycle. Fill the water tank and put it back into the machine.
Repeat from step 15.
18
Remove and empty the container.
19
Empty the drip tray and place it back.
Yellow
17
The machine warms up and performs the automatic rinse cycle.
1
3
2
To Next Page
Loading...
