To Next PageTo Next PageWhy Philips Espresso coffee machine does not turn on?
If your Philips Espresso coffee machine does not turn on, ensure it is properly connected to the electrical network and that the power button is switched to the 'I' position.
Why is no coffee brewed in my Philips Espresso coffee machine?
If no coffee is being brewed, the coffee is being brewed slowly, or it's coming out drop by drop from your Philips Espresso coffee machine, it could be due to several reasons: * The coffee grind might be too fine. * The circuit may not be primed. * The brew group could be dirty. * The dispensing spout may be dirty. * The machine circuit may be clogged by limescale. To resolve this, you may need to change the coffee blend, adjust the grinding, prime the circuit, clean the brew group, clean the dispensing spout and its holes, or descale the machine.
Why is there no hot water from my Philips Espresso coffee machine?
If no hot water or steam is dispensed from your Philips Espresso coffee machine, it could be due to a clogged steam/hot water wand, a dirty Classic Milk Frother, an unprimed circuit, or limescale buildup in the machine circuit. Try cleaning the steam wand hole with a pin, cleaning the Classic Milk Frother, priming the circuit or descaling the machine.
How to make coffee hotter with Philips Espresso coffee machine?
If the coffee from your Philips Espresso coffee machine is not hot enough, it could be because the cups are cold or the temperature is not correctly set. Preheat the cups with hot water and adjust the temperature setting.
Why does coffee leak from Philips Espresso coffee machine?
If coffee leaks out of the dispensing spout of your Philips Espresso coffee machine, it is likely that the dispensing spout is clogged. Clean the dispensing spout and its holes.
What to do if descaling cycle cannot be completed on Philips Espresso coffee machine?
If the descaling cycle of your Philips Espresso coffee machine cannot be completed, it means that the water dispensed for the rinse cycle is not enough. Press the on/off button and follow the instructions described in the “Interruption of the Descaling Cycle” section.
What to do if the brew group cannot be removed from Philips Espresso coffee machine?
If the brew group of your Philips Espresso coffee machine cannot be removed, it may be out of place or the coffee grounds drawer might be inserted. To solve this, turn on the machine, close the service door (the brew group should return to its initial position automatically) and remove the coffee grounds drawer before attempting to remove the brew group.
What to do if Philips Espresso coffee machine shows Error Code 5?
If you are getting Error Code 5 on your Philips Espresso coffee machine, it indicates a water circuit error. This could be due to air in the water circuit. Try removing and reinserting the water tank a few times, ensuring it's properly placed and that the compartment is clean. If you have an Intenza+ filter installed, remove it, turn the machine off and on, and then reinsert the filter when the machine is ready.
What to do if Philips Espresso coffee machine shows Error Code 3-4?
If you are receiving Error Code 3-4 on your Philips Espresso coffee machine, it indicates that the brew group is blocked and cannot be pulled out. This is likely because the brew group is out of place. To resolve this, close the service door, turn the machine off and then back on. The brew group should automatically return to its initial position.
How to turn of demo mode in Philips Espresso coffee machine?
If your Philips Espresso coffee machine is in demo mode, it is probably because the ' ' button was pressed and held for more than 8 seconds. Turn the machine off and back on using the power button.
General| Type | Espresso Machine |
|---|---|
| Model | HD8841 |
| Color | Black |
| Water Tank Capacity | 1.8 L |
| Coffee Bean Container Capacity | 250 g |
| Pressure | 15 bar |
| Weight | 7.2 kg |
| Programmable | Yes |
| Milk Frother | Yes |
| Removable Drip Tray | Yes |
| Auto Shut-off | Yes |
