Philips HD8844 - FIRST TIME USE AND CONFIGURATION; Circuit Priming and Rinse Cycles

13 ENGLISH 13
USING THE MACHINE FOR THE FIRST TIME
When using the machine for the  rst time, the following activities need to
happen:
1) You need to prime the circuit.
2) The machine will perform an automatic rinse/ self-cleaning cycle.
3) You need to perform a manual rinse cycle.
Circuit Priming
During this process, fresh water  ows through the internal circuit of the
machine and the machine warms up. This takes a few minutes.
1
Place a container under the steam wand.
Yellow
2
Press the “ ” button to start the circuit priming.
Yellow
3
The bar under the icon shows the operation progress. When the pro-
cess has been completed, the machine stops dispensing automatically.
Yellow
4
The control panel now shows the machine warm-up icon.