28
ENGLISH
Adjusting the Co ee Length
The machine allows you to adjust the quantity of co ee according to your
taste and the beverage setting ranges described in the "Factory Settings"
chapter. You can reduce it for a stronger taste or increase it for a lighter
one. Each button may be individually programmed for a speci c brew
setting.
1
Place a cup under the co ee dispensing spout.
2
Press and hold the “ ”, “ ” or “ ” button until the “MEMO” icon is
displayed. Then release the button. The machine is in programming
mode and starts brewing the selected product.
Note:
To exit programming press the “
” button once the “ ” is displayed. In
this case, the product quantity will not be saved.
3
The product quantity can be saved when the icon “ ” on the left bot-
tom corner of the display is shown.
GreenGreen Green
4
Press the “ ” button as soon as the desired co ee quantity is reached.
The icon on the left is displayed.
Note:
This icon is also displayed in case the maximum set level is reached.
The previously selected “ ”, “ ” or “ ” button is now programmed; each
time it is pressed, the machine will brew the same product length that was
just programmed.
Note:
The gures relate to the
“ ”
button programming.
To Next Page
Loading...
